supercoil

2007-06-15T15:44:00.001-07:00

Exactly 24 hours after installing the Genesa Crystal This Gold Finch Roosted on it.

2007-06-15T06:53:00.000-07:00

I've added a Genesa Crystal to the VOD Fountain

Wow, What Energy!

2007-06-02T13:00:00.000-07:00

Orgone helps flowers grow

Orgone Water
Makes the Birds Sing!

Orgone And Animals

2007-05-25T06:26:00.000-07:00

(C) Alan D. Otterson
Orgone Attracts Animals

Animals Drink and Bathe In the Orgonizied Water

Plants and Trees also benefit

2005-08-06T20:04:00.000-07:00

Alan D. Otterson
alancath@earthlink.net
Orgone / Orgonite Energy Beam

This is my blog for making the
VOD Vibrational Orgone Device.

2005-08-05T12:32:00.000-07:00

T he HAARPOONER
July 2005
© Alan D. Otterson

To make the HAARPOONER, You need to make to coils.
The Beehive coil is made from 3/8" ID copper refrigerator tubing.
Bend the coil into the shape of half of a beehive. Clockwise turns.

The coil that goes in the inside of the beehive coil is mad from 3/8" OD.
refrigerator tubing.
This coil is bend counter clockwise.
Insert the smaller coil into the larger beehive coil.
Connect the two coils by a large sleeve an solder the sleeve.
Or you can solder the two coils directly together.

Should look like this

Start by making a large SBB coil
that is 20.6" Long.
(Sacred Geometry discovered by
Slim Spurling.)

Use a small coffee can for the inner coil pour,
or you can use a larger container and make one pour
.

You also need to make two large
Texas size muffin orgonite using activated
charcoal.
And the other ingredients used in the base.

One muffin is placed into the small coils.
And the other is placed in the large outer
coil.

Place the Smaller coil on inside and
on top of the larger coil and your done.

NO GUARANTEES ARE MADE
As each person might get different Results
As intent is a big part of the success of this device.
© Alan D. Otterson

The VOD Project

2005-08-05T10:37:00.000-07:00

Instructions for buildig the
VOD Vibrationl Orgone device.
Alan D. Otterson

The VOD Project
Vibrational Orgonite Device
Copyright Alan D. Otterson
Items needed for making the VOD.
4 3'4" Copper Pipes 24" long
Aluminum shavings
Quarts Crystals Pyrite, BB’s
3'8" Copper refrigerator coiled Copper Tubing
Polyester Resin+hardener
________________________________________
Make a large SBB coil out of the 3/8" copper coil tubing
Solder the four 24" long Copper pipes to the SBB coil as
shown in the photos.

Use a small block 4-6" squar.. Drill four 7/8" Hole spaced apart.

Make a Small SBB coil fitted around a Quarts crystal
you will need 4 of them.

A small pail is used for the mold. Spray the inside of the pail with
Pam cooking oil or wd 40 sprayed into the pail If you wish to take out the harden Orgonite.
Mix the resin according to instructions and pour a little into the pail
the start adding the crystals and metal shavings layering as you pour the resin
to whatever thickness you wish,

The VOD Project
Vibrational Orgonite Device
Copyright Alan D. Otterson

Save a few crystals to place into the top layer as it starts to cure.
That’s all there is. Then after it hardens place four quarts crystals into the
top of the four copper pipes and its done.

REMEMBER:
Throughout the process you must use your intent and payers to program
the creation to make it work
Alan D. Otterson